Calibration Discipline

Overview of Disciplines

Companies with the most stringent quality requirements trust EVE techno solutions to meet their calibration needs. EVE techno solutions provides calibrations for a broad array of disciplines and instruments, allowing you to fulfill your calibration needs from Best, reliable Accredited Labs:

Accredited to ISO/IEC 17025:2005, Our Partner Lab's quality system meets the technical competence and management system requirements that are necessary to consistently deliver technically valid test results and calibrations. As an accredited laboratory, we work to the highest metrology standards and demonstrate competency to metrology-trained auditors from the accrediting body. We encourage current and prospective clients to audit our quality system and facilities. If you would like to make arrangements – or simply have questions about why you should work with an accredited vendor like us – please call +91-70421 55735.

Dimensional

• Length Measurement Instruments from Micrometersand Calipers to Tape Measures and Height Gages
• Optics-based Instruments from Glass Scales to Optical Comparators
• Geometric Dimensioning & Tolerancing (GD&T) such as Overlays to Custom Gaging

Electrical

• DC/AC-LF (DC to 100 MHz) Instruments from Multimeters and Power Supplies to Signal Generators and Oscilloscopes
• HF/UHF (>100 MHz to 1.3 GHz) Instruments from Scopemeters and Oscilloscopes to Time Domain Reflectometers
• RF/Microwave (>1.3 GHz to 26.5 GHz) Instruments from Power Meters and Oscilloscopes to Time Domain Reflectometers and Spectrum Analyzers
• Luminance/Illuminance (400nm to 800nm) Instruments such as Luxmeters and Lightmeters
• VXI/VMEbus and PXI/PCIbus Architecture Instruments such as National Instrument Cards

Physical

• Pressure and Vacuum Instruments from Pressure Gauges and Manometers to Barometers and Pressure Calibrators
• Temperature Instruments (Secondary Level/Industrial: > 0.1°C) from Liquid-in-Glass Thermometers and Thermocouples to Temperature Indicators and Dry Block Calibrators
• Velocity (Speed) and RPM (Rotational Speed) Instruments from Tachometers and Tuning Forks to Radar Guns and Radar Detectors
• Rotational Force i.e., Torque Instruments from Torque Wrenches and Torque Screwdrivers to Torque Testers and Torque Analyzers
• Humidity Instruments from Chart Recorders and Humidity Meters to Thermo-Hygrometers and Humidity/Temperature Transmitters
• Mass and Weighing Instruments from Weights and Weight Sets Class 1-3 and 4, 5, 6, 7 to Scales and Balances
• Force and Hardness Instruments from Dynamometers and Crimp Tools to Force Gauges and Load Cells
• Infrared Thermometers such as -20° to 1,000°C Infrared Thermometers and Pyrometers
• Particle Counters from Sizes 0.3, 0.5, 0.7, 1, 2, 3, 5 Microns Particle Counters to Environmental Meters
• Vibration, Acceleration, and Seismography Instruments from Accelerometers and Vibration Meters to Vibration Calibrators and Wobulators
• Flow Meters such as 0 to 100 slpm of Air Only Flow Meter, 0 to 100 slpm
• Air Velocity, Flow, and Leak Rate Instruments such as Flow Meters and Air Velocity Meters
• Gas Analysis Instruments from Oxygen Meters to Combustible/Toxic Meters
• Environmental Instruments/Devices from Particle Counters to Environmental Meters

Reference Level

• Humidity Laboratory Standards from Chart Recorders and Transmitters (1% RH or Better) to Chambers
• Dimensional Laboratory Standards from End Measuring Rods and Gage Blocks to Ring Gages and Master Setting Plugs
• Temperature Laboratory Standards (Accuracy <=0.1°C) such as SPRT by Fixed Point and/or Comparison
• Mass, Weight, Force, and Torque Laboratory Standards such as Weights and Weight Sets, Class 1, 2, or 3
• Electrical DC/AC-LF Laboratory Standards from High Voltage Dividers and High Voltage Meters to Multifunction Calibrators and Multimeters (>=7.5 digits)
• Pressure and Vacuum Laboratory Standards from Pressure Devices and Pressure Calibrators to Deadweight Testers